مجموعةِ كُتُب عن Ceramic

[EBN EL NEAL]

( Ceramic Matrix Composites )

by I. M. Low

Table of Contents


Fibrous monolithic ceramics 9

2 Whisker-reinforced silicon nitride ceramics 33
3 Fibre-reinforced glass/glass-ceramic matrix composites 58
4 Particulate composites 99
5 Functionally-graded ceramic composites 131
6 SiAlON based functionally graded materials 154
7 Design of tough ceramic laminates by residual stresses control 178
8 Hardness of multilayered ceramics 216
9 Nanophase ceramic composites 243
10 Nanostructured coatings on advanced carbon materials 260
11 Processing and microstructural control of metal-reinforced ceramic matrix nanocomposites 285
12 Carbon nanotubes-ceramic composites 309
13 Machinable nanocomposite ceramics 334
14 Magnesia-spinel (MgAl[subscript 2]O[subscript 4]) refractory ceramic composites 359
15 Thermal shock of ceramic matrix composites 400
16 Superplastic ceramic composites 434
17 Interfaces in non-oxide ceramic composites 461
18 Sialons 491
19 Carbon-ceramic alloys 514
20 Silicon nitride and silicon carbide-based ceramics 536
21 Oxynitride glasses - glass ceramics composites 560
22 Functionally graded ceramics 575

Links





http://ifile.it/c2458v



or

http://rapidshare.com/files/17854681/CMCM.rar

[EBN EL NEAL]

( Handbook of Ceramic Composites , 1s t edition )

by Narottam P. Bansal

Book Description

Ceramic matrix composites (CMCs) are at the forefront of advanced materials technology because of their light weight, high strength and toughness, high temperature capabilities, and graceful failure under loading. During the last 25 years, tremendous progress has been made in the development and advancement of CMCs under various research programs funded by the U.S. Government agencies: National Aeronautics and Space Administration (NASA), Department of Defense (DoD), and Department of Energy (DOE).

Ceramic composites are considered as enabling technology for advanced aeropropulsion, space propulsion, space power, aerospace vehicles, and space structures. CMCs would also find applications in advanced aerojet engines, stationary gas turbines for electrical power generation, heat exchangers, hot gas filters, radiant burners, heat treatment and materials growth furnaces, nuclear fusion reactors, automobiles, biological implants, etc. Other applications of CMCs are as machinery wear parts, cutting and forming tools, valve seals, high precision ball bearings for corrosive environments, and plungers for chemical pumps. Potential applications of various ceramic composites are described in individual chapters of the present handbook.

Handbook of Ceramic Composites is different from the other books available on this topic. Here, a ceramic composite system or a class of composites has been covered in a separate chapter, presenting a detailed description of processing, properties, and applications. Each chapter is written by internationally renowned researchers in the field. The handbook is organized into five sections: Ceramic Fibers, Non-oxide/Non-oxide Composites, Non-oxide/Oxide Composites, Oxide/Oxide Composites, and Glass and Glass-Ceramic Composites.

This handbook should be a valuable source of information for scientists, engineers, and technicians working in the field of CMCs, and also for designers to design parts and components for advanced engines, and various other industrial applications.

Link

http://rapidshare.com/files/28537413/Hocc.rar

[EBN EL NEAL]

Ceramic Matrix Composites

Microstructure, Properties and

Applications



by I. M. Low



Product Description


It is well recognized that the mechanical performance of materials is dependant upon the composition of their microstructures. By judiciously adjusting the composition new properties can be developed. This comprehensive new book evaluates the microstructure-property relationships of various ceramic-matrix composites. Organized into five sections, it examines fibre, whisker, and particulate-reinforced ceramic composites; graded and layered composites; nanostructured ceramic composites; and refractory and specialty ceramic composites, such as magnesia-spinel composites; superplastic ceramic composites; oxide-carbon metal systems; and highly porous carbon-carbon composites

links



http://ifile.it/vozb1h


or


http://rapidshare.com/files/17854681/CMCM.rar

[EBN EL NEAL]

Ceramic and Glass Materials

Structure,

Properties and Processing


by James F. Shackelford, Robert H. Doremus






Product Description


Ceramic and Glass Materials: Structure, Properties and Processing covers a wide range of important ceramic and glass materials used in modern technology. Chapters provide essential information on the nature of these key ceramic raw materials including their structure, properties, processing methods and applications in engineering and technology. Treatment is provided on materials such as Alumina - Aluminates - Andalusite, Kyanite, and Sillimanite - Clays - Concrete and Cement - Lead Compounds - Mullite - Quarts and Silicas – Refractory Oxides - Sillimanite Minerals (including Andalusite, Kyanite, and Sillimanite) - Zirconia.

Written by recognized leaders in the field of ceramic and glass materials, Ceramic and Glass Materials: Structure, Properties and Processing is a must-have book for those seeking the latest information.

Links

http://ifile.it/8lguwt1

or

http://rapidshare.com/files/11142417..._Materials.pdf

[نمر العصيمى]

وفقك الله
ولا تحرمنا من مواضيعك المتألقة دوما
كل الخير أتمناه لك

[EBN EL NEAL]

Ceramic Fabrication Technology (Materials Engineering, 20

ByRoy W. Rice

Product Description

Bridging the gap between textbook science and real-world engineering and operational applications, this reference presents comprehensive and easy-to-follow summaries and evaluations of fabrication techniques for ceramic and ceramic composite specimens and components. The author addresses both conventional and alternative powder-based fabrication, chemical vapor deposition, melt processing, and reaction processing. Topics include the preparation of ceramic powders, plastic forming, colloidal processing,

the use of additives to aid densification, hot pressing, thefabrication of filaments for reinforcement, rapid prototyping, and gaseous impurities

Links

http://ifile.it/67ybnw

or

http://rapidshare.com/files/686229/CFT.rar

[EBN EL NEAL]

Ceramic Processing and Sintering, Second Edition

by Mohamed N. Rahaman

Product Description

As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics

Links

http://ifile.it/t7xspw



or

http://rapidshare.com/files/50819161...0824709888.rar

[EBN EL NEAL]

Ceramic Membranes for Separation and Reaction

by Kang Li

Book Description

Ceramic Membranes for Reaction and Separation is the first single-authored guide to the developing area of ceramic membranes.

Starting by documenting established procedures of ceramic membrane preparation and characterization, this title then focuses on gas separation. The final chapter covers ceramic membrane reactors;- as distributors and separators, and general engineering considerations.

Links

http://ifile.it/el0yuv

or

http://www.mediafire.com/?4tyjjmqjd9j

[ابن العراق]

الله يعطيك الف الف عافيه حبيبي البي

Mohamed Ryaad

[EBN EL NEAL]

الله يعطيك الف الف عافيه حبيبي البي

Mohamed Ryaad

ربنا يخليك لينا يا بروفسيرنا يا غالى ونحن تلامذتك وانت استاذنا

وانت والله حبيب البى جدا جدا جدا

وشرفتنى بمشاركتك الكريمه انت واخى تايقر ربنا يبارك فيكم

ويخليكم لجامعتنا وهناك كتب كتيره فى الطريق

وهذه القبلات هديه لكم

[EBN EL NEAL]

Fiber Reinforced Ceramic Composites

Materials, Processing

and Technology

(Materials Science and Process Technology

Series)

by ed. by K.S. Mazdiyasni

Book Description

Provides the first comprehensive treatment of continuous and discontinuous ceramic fiber and whisker reinforced ceramic composites, written by 29 authorities in the field of
Front Matter

links

http://ifile.it/f3an61

or

http://rapidshare.com/files/33046580/FRCC.rar

[EBN EL NEAL]

Ceramic Materials: Science and Engineering





by C. Barry Carter, M. Grant Norton
















هنا

[EBN EL NEAL]

Ceramic Interconnect Technology Handbook





by III, Fred D. Barlow, Aicha Elshabini

هنا

[EBN EL NEAL]

Handbook of Ceramic Hard Materials 2-Volume Set

By Ralf Riedel

Product Description

Corrosion, friction and wear protection are of great importance in researchand development of new engineering materials. Ceramic materials exhibiting an extraordinary hardness are often first choice in applications of high mechanical stress.
In this reference work the different application areas of these hard materials are discussed as well as the chemical and physical basics of these special material properties. The book is of high importance especially for materials scientists and engineers, solid-state chemists and physicists involved in the research and development of new ceramic hard materials and coatings.

Links

http://ifile.it/lbz420n

or

http://rapidshare.com/files/11737849...3527299726.rar

[chemistry]

بسم الله ما شاء الله
شغل رائع أخى محمد
وفقك الله سبحانه وتعالى لما يحبه ويرضاه

[EBN EL NEAL]

بسم الله ما شاء الله
شغل رائع أخى محمد
وفقك الله سبحانه وتعالى لما يحبه ويرضاه

شكرا اخى الحبيب وبارك الله فيك على الزياره ونحن تلامذه بجوارك انت واخى عبد الجبار وكنت اود ان يكون هذا الموضوع مكتبه لكل لكتب السيراميك بالمنتدى لانه مطلوبه جدا هذه الكتب عندنا بمصر لذا بحاول اضافة كل ما اجده من كتب هنا لهذا الموضوع وعاوزين مساهماتك معنا لو وجدت كتاب جديد لم اضعه اعمله فى موضوع مستقل بأسمك وأضف صورته وأسمه ورابطه لموضوعك كمشاركه معى فى هذا الموضوع أيه رأيك وهذا الكلام لك ولكل الاعضاء
والسلام

[aljonayd]

thanks a lot i can't really show you all my gratitude even if i said thanks a million time

[EBN EL NEAL]

نظرا لان روابط الكتاب الاتى قديمه ولا تعمل

لذا كررت اضافته هنا

Ceramic Materials
Science and Engineering

By C. Barry Carter; M. Grant Norton

• Publisher: Springer
  
  
  Number Of Pages: 716
  
  
  Publication Date: 2007-04-20
• Binding: Hardcover

Product Description

Ceramic Materials: Science and Engineering is an up-to-date treatment of ceramic science, engineering, and applications in a single, integrated text. Building on a foundation of crystal structures, phase equilibria, defects and the mechanical properties of ceramic materials, students are shown how these materials are processed for a broad diversity of applications in today's society. Concepts such as how and why ions move, how ceramics interact with light and magnetic fields, and how they respond to temperature changes are discussed in the context of their applications. References to the art and history of ceramics are included throughout the text. The text concludes with discussions of ceramics in biology and medicine, ceramics as gemstones and the role of ceramics in the interplay between industry and the environment. Extensively illustrated, the text also includes questions for the student and recommendations for additional reading.

links

http://xinio.info/?http://ifile.it/gn95shd/ceramic_materials_science_and_engineering.rar

or

http://www.filefactory.com/file/a1d911/n/ceramic_materials_science_and_engineering_rar

or

http://www.filefactory.com/file/584c05/n/0387462708_rar

or

http://rapidshare.com/files/104284934/0387462708.rar.html

or

http://www.zshare.net/download/9947474c440cb2/

[EBN EL NEAL]

نظرا لان روابط الكتاب الاتى قديمه ولا تعمل
لذا كررت اضافته هنا

Ceramic Interconnect Technology
Handbook

By III, Fred D. Barlow, Aicha Elshabini

• Publisher: CRC
  
  
  
  
  
  Number Of Pages: 456
  
  
  
  Publication Date: 2007-01-24
• Binding: Hardcover

Product Description

Ceramics were among the first materials used as substrates for mass-produced electronics, and they remain an important class of packaging and interconnect material today. Most available information about ceramic electronics is either outdated or focused on their materials science characteristics. The Ceramic Interconnect Technology Handbook goes beyond the traditional approach by first surveying the unique properties of ceramics and then discussing design, processing, fabrication, and integration, as well as packaging and interconnect technologies. Collecting contributions from an outstanding panel of experts, this book offers an up-to-date overview of modern ceramic electronics, from design and material selection to manufacturing and implementation. Beginning with an overview of the development, properties, advantages, and applications of ceramics, coverage spans electrical design, testing, simulation, thermomechanical design, screen printing, multilayer ceramics, photo-defined and photo-imaged films, copper interconnects for ceramic substrates, and integrated passive devices in ceramic substrates. It also offers a detailed review of the surface, thermal, mechanical, and electrical properties of various ceramics as well as the processing of high- and low-temperature cofired ceramic (HTCC and LTCC) substrates. Opening new vistas and avenues of advancement, the Ceramic Interconnect Technology Handbook is the only source for comprehensive discussion and analysis of nearly every facet of ceramic interconnect technology and applications.

links

http://rapidshare.com/files/67147931/Ceramic_Interconnect_Technology_Handbook_0849335574.rar

or

http://xinio.info/?http://ifile.it/t1uh2m0/ceramic_interconnect_technology_handbook_0849335574.rar

or

http://www.filefactory.com/file/e52a30/n/ceramic_interconnect_technology_handbook_0849335574_rar

[aljonayd]

شكرا جزيلا لك أخي رياض على هذا المجهود الجبار وجعله الله في ميزان حسناتك