COILED_TUBING AND PRESSURE_CONTROL_EQUIPMENT

المهاجر · #1 2008-03-31, 01:25 AM

COILED_TUBING AND PRESSURE_CONTROL_EQUIPMENT
Schlumberger_Dowell

This manual has been prepared to complement the information provided through the presentations and
discussions held during a Schlumberger Dowell Coiled Tubing Client School. The technical information within
this manual is intended to provide a basic understanding of the equipment, tools, processes and design
requirements associated with modern coiled tubing operations. Comprehensive and detailed information, such
as that required to safely and successfully complete the design and execution of coiled tubing operations, may
not be included. Consequently, it is recommended that the local Dowell representative be consulted during the
feasibility or design preparation phase of any coiled tubing operation.
Contents

1 COILED TUBING EQUIPMENT................ 1
1.1 Injector Head .................................. 1
1.1.1 Hydraulic Motors ................... 2
1.1.2 Drive Chains .......................... 3
1.1.3 Chain Tensioners .................. 4
1.1.4 Gooseneck ............................ 4
1.1.5 Weight Indicator .................... 4
1.2 Coiled Tubing Reel ......................... 5
1.2.1 Reel Drum ............................. 5
1.2.2 Reel Drive System ................. 6
1.2.3 Levelwind Assembly .............. 7
1.2.4 Reel Swivel and Manifold ...... 7
1.3 Power Pack and Control Cabin ...... 7
1.3.1 Engine ................................... 9
1.3.2 Hydraulic Pumps ................... 9
1.3.3 Pressure Control Valves ........ 9
1.3.4 Hydraulic Reservoir ............... 9
1.3.5 Filters and Strainers .............. 9
1.3.6 Heat Exchangers ................... 9
1.3.7 Hydraulic Fluid ....................... 10
1.3.8 Control Cabin ........................ 10
2 PRESSURE CONTROL EQUIPMENT ..... 10
2.1 Stripper ........................................... 10
2.2 Quad and Combi BOPs .................. 11
2.2.1 Blind Rams ............................ 12
2.2.2 Shear Rams .......................... 12
2.2.3 Slip Rams .............................. 12
2.2.4 Pipe Rams ............................. 12

حمل الكتاب مباشرة من المرفقات

ابن العراق · #2 2008-03-31, 05:33 AM

سلمت أيــاديك على هذه كتاب....والله تستحق كل الشكر والتقدير و ( التقييـم )....ألف مليار مشكور ...تقبـل منى جزيل الشكر .....بارك الله فيك وجزاك عنا خيرا

خيارات الموضوع
عرض نسخة للطّباعة ارسل هذه الصفحة لصديق
طريقة العرض
النمط المتتابع التحول إلى النمط التشعبي التحول إلى النمط الأُحادي

هذا الطالب يتقدم بالشكر لكاتب الموضوع المهاجر علي هذه المشاركة الطيبة :
ابن العراق (2008-03-31)

يتصفح الموضوع حالياً : 1 (0 عضو و 1 ضيف)