كتبي: DOE FUNDAMENTALS HANDBOOK ELECTRICAL SCIENCE 1 to 4

abdoud · #1 2008-07-01, 07:39 PM

DOE FUNDAMENTALS HANDBOOK
ELECTRICAL SCIENCE 1 to 4

The Department of Energy (DOE) Fundamentals Handbooks consist of ten academic
subjects, which include Mathematics; Classical Physics; Thermodynamics, Heat Transfer, and
Fluid Flow; Instrumentation and Control; Electrical Science; Material Science; Mechanical
Science; Chemistry; Engineering Symbology, Prints, and Drawings; and Nuclear Physics and
Reactor Theory. The handbooks are provided as an aid to DOE nuclear facility contractors.
These handbooks were first published as Reactor Operator Fundamentals Manuals in
1985 for use by DOE category A reactors. The subject areas, subject matter content, and level
of detail of the Reactor Operator Fundamentals Manuals were determined from several sources.
DOE Category A reactor training managers determined which materials should be included, and
served as a primary reference in the initial development phase. Training guidelines from the
commercial nuclear power industry, results of job and task analyses, and independent input from
contractors and operations-oriented personnel were all considered and included to some degree
in developing the text material and learning objectives.
The DOE Fundamentals Handbooks represent the needs of various DOE nuclear
facilities' fundamental training requirements. To increase their applicability to nonreactor nuclear
facilities, the Reactor Operator Fundamentals Manual learning objectives were distributed to the
Nuclear Facility Training Coordination Program Steering Committee for review and comment.
To update their reactor-specific content, DOE Category A reactor training managers also
reviewed and commented on the content. On the basis of feedback from these sources,
information that applied to two or more DOE nuclear facilities was considered generic and was
included. The final draft of each of the handbooks was then reviewed by these two groups. This
approach has resulted in revised modular handbooks that contain sufficient detail such that each
facility may adjust the content to fit their specific needs.
Each handbook contains an abstract, a foreword, an overview, learning objectives, and
text material, and is divided into modules so that content and order may be modified by
individual DOE contractors to suit their specific training needs. Each subject area is supported
by a separate examination bank with an answer key.
The DOE Fundamentals Handbooks have been prepared for the Assistant Secretary for
Nuclear Energy, Office of Nuclear Safety Policy and Standards, by the DOE Training
Coordination Program. This program is managed by EG&G Idaho, Inc.

The Department of Energy Fundamentals Handbook entitled Electrical Science was
prepared as an information resource for personnel who are responsible for the operation of the
Department's nuclear facilities. A basic understanding of electricity and electrical systems is
necessary for DOE nuclear facility operators, maintenance personnel, and the technical staff to
safely operate and maintain the facility and facility support systems. The information in the
handbook is presented to provide a foundation for applying engineering concepts to the job.
This knowledge will help personnel more fully understand the impact that their actions may have
on the safe and reliable operation of facility components and systems.
The Electrical Science handbook consists of fifteen modules that are contained in four
volumes. The following is a brief description of the information presented in each module of the
handbook.
Volume 1 of 4
Module 1 - Basic Electrical Theory
This module describes basic electrical concepts and introduces electrical
terminology.
Module 2 - Basic DC Theory
This module describes the basic concepts of direct current (DC) electrical circuits
and discusses the associated terminology.
Volume 2 of 4
Module 3 - DC Circuits
This module introduces the rules associated with the reactive components of
inductance and capacitance and how they affect DC circuits.
Module 4 - Batteries
This module introduces batteries and describes the types of cells used, circuit
arrangements, and associated hazards.

الاجزاء الاربعة موجودة على هذا الرابط

نمر العصيمى · #2 2008-07-03, 10:59 PM

جزاك الله خير أخي abdoud وجعلهاء في موزين حسناتك أنا من أشد المعجبين في مواضيعك ذات اطراء رائع لا تبخل عليناء يا أستاذناء الكبيرررررررررررر

Samo · #3 2008-07-04, 01:25 AM

بارك الله فيك اخي عبود

خيارات الموضوع
عرض نسخة للطّباعة ارسل هذه الصفحة لصديق
طريقة العرض
النمط المتتابع التحول إلى النمط التشعبي التحول إلى النمط الأُحادي

مواضيع مشابهة للموضوع: كتبي: DOE FUNDAMENTALS HANDBOOK ELECTRICAL SCIENCE 1 to 4
الموضوع	الكاتب	القسم	الردود	آخر مشاركة
كتبي: The Mechatronics Handbook	abdoud	هندسة الميكاترونكس	7	اليوم 12:28 AM
Fundamentals of Electrical Drives	deepa08	الهندسة الإلكترونية والكهربائية	0	2008-09-04 07:46 PM
كتبي: Electrical Safety Handbook	abdoud	الهندسة الإلكترونية والكهربائية	0	2008-08-20 03:54 AM
كتبي: The Electric Power Engineering Handbook	abdoud	الهندسة الإلكترونية والكهربائية	4	2008-07-05 05:54 PM
كتاب The Handbook of Optical Communication Networks (Electrical Engineering Handbook	samir	الهندسة الإلكترونية والكهربائية	5	2007-10-08 01:27 PM

عدد 2 من الطلاب تقدموا بالشكر لكاتب الموضوع abdoud علي هذه المشاركة الطيبة :
ksonali84 (2008-07-04), نمر العصيمى (2008-07-03)

يتصفح الموضوع حالياً : 1 (0 عضو و 1 ضيف)